7 Easy Heat Pump Repair and Maintenance Tips to Follow

by | Nov 8, 2021 | Heating & Air Conditioning

Clueless about heat pump repair in St Louis? Adding to your DIY skills and learning a bit about basic repairs around your home is a wise and practical move. This way, you can save on costs by getting them done yourself instead of having to call a professional to deal with simple, even basic maintenance and preventive tasks. So if you find your heat pump simply won’t work, here are a few steps from Home Tips to follow:

  1. Is the thermostat on the proper setting? You’d be surprised at how often people forget to check thermostat settings first, assuming the damage is already massive when it isn’t. Before you start ringing for heat pump repair assistance, make sure you check if the thermostat is on properly.
  2. Does the thermostat match the heat pump? If you replaced your thermostat a day or two ago, the brand or style might be not be compatible with your heat pump, hence the problem. So make sure you check that out before you buy a replacement.
  3. Are the wires matched up properly? If it’s not a compatibility issue then check the wiring. An improperly wired thermostat can impair certain electronic parts and keep your heat pump from doing its job.
  4. Check for switches. Some heat pumps use wall switches to operate. If you haven’t been using this type for long, you might have forgotten to turn on the switch in the first place. So check that before you try and gouge your heat pump apart to check for anything that needs to be repaired, especially when all it takes is flicking up a switch.
  5. Look over the circuit breakers or fuses. If your unit is connected to any of these, heat pump repair in St Louis might not be necessary if all that’s happened is a wire that got tripped or disconnected. Restoring the connection would be easy enough.

More Tips to Deal with Temperature Trouble
If you’re still having problems, you might try a few of these tips:

  1. Check the room-heating registers and see if they’re open. If they are, that might be the reason your heat pump doesn’t seem to be working.
  2. What about the condition of the filter? If your heat pump filter is already loaded with dirt, it’s high-time you replaced that with a new one. You should make it a point to replace that twice a year to give your unit the chance to perform at its optimal best.

These are just 7 handy heat pump repair and maintenance tips you can follow. Don’t forget to regularly inspect your thermostat so you can catch problems early on!

If you need heat pump repair near St Louis, then contact Classic Aire Care. Visit Sitename for more information!

Latest Articles

Categories

Archives